Ring-pull chandelier

Wacky project alert!

OK so it might not be to everyone's taste but it kept me busy for a bit and, let's face it, what else could I make with hundreds of ring-pulls?  If it's any credit to my sanity, I rejected the idea of chainmail clothing.

Here's a few snaps of the process, in case any of ye are cracked enough to try this yourselves.  Twist wire into a large circle.  Bend a ring pull and fold over the circle.

Use a wire snips to slice through a bunch of ring-pulls, top and bottom,  and daisy chain them together.  Repeat, repeat, repeat.

I made four tiers, each wire circle a smaller size than the previous.  I hung each tier off the previous, so ensure your first / largest tier is sturdy enough that it won't sag under the weight.  You'd be surprised how heavy the finished piece is. 

DIY Junkbox is now on Facebook

Follow this link to Like the page and keep up tp date with new projects and tutorials:   www.facebook.com/selenasdiyjunkbox

Long skirt to baggy pants in 5 minutes!

This sewing project is so easy and super quick if you have a sewing machine and the pants will probably be some of the most comfortable you have ever worn.  I found this hippie skirt in a second hand shop for the huge cost of 1 Euro.  There's a zip in the side but this tutorial will also work with elastic and drawstring waists. 

 Turn the skirt inside out and lay it out flat.  I turned the zip to the front.  Be careful to spread out the skirt evenly.  This can be a little tricky if your skirt  has a tight lining like mine.  Just take your time and when you're happy pin a straight line through all layers from about a third of the way down from the waist.  

 Sew a straight line on both sides of the pins, meeting at the top / crotch.  Cut between  the lines and voila!  New pants! 

Cat Crinkle Wrestling Sausage Toy

Another cat craft project!  I swear I'm not a crazy cat lady; I have just one cat, but he deserves fun toys to play with.  This Wrestling Sausage is a great idea I found online today at littlegreencat.com (full link at end of tutorial).  The sausage shape is perfect for wrestling.  It's narrow so it's easily trapped in a 'head-lock', long enough for back-leg scratching and it crinkles!  I included the following hi-tech features; a bell / rattle, a feather and ribbon streamers!  This toy was an instant hit.

 Materials

Rectangle of cloth aprox 12" x 5"
T-shirt cotton is cheap.  You could use any material that will withstand some scratching.  I don't recommend wool for this reason.  I used a patchwork of various material simply because it was going unused from a previous project.  The variety of texture might even be interesting for scratching.

Crinkly sounding stuff;
You can use any, or all, of the following.  Listed in order of crinkliness,
Mylar, clean crisp / chip bag foil, plastic shopping bag, tracing paper, Cellophane, regular paper.

A shoelace, piece of string or cord

Optional extra's

To make a rattle
A clean plastic lid from a shampoo bottle, glue-stick or something similar, aprox. 2" diameter.
A bell or bead.
Scrap of card
Tape

Feathers, ribbons or strips of cloth to make streamers.  I can't emphasise feathers enough!
Dried Catnip, if your cat is into it.

Method

Fold cloth in half lengthways, with right sides together.  Sew along one short side and long side.

Sewing short side.

Sewing long side.

This creates a tube.  Turn tube right side out.  Roll up the crinkly paper, scattering Catnip between the layers if desired.  Insert the roll of paper into the tube.

Crinkle power!

To make the rattle simply place a few beads or a bell into a plastic cap.  Cut a piece of card to close the rattle and tape the entire piece to ensure the beads cannot fall out.

Cutting guidelines shown on piece of card: Cut along the straight lines.

Place open end of cap on the card and fold flaps down the sides.

Tape it all up.

We'll bundle the rattle up in wool and cloth so that it won't be too hard.  I used black, fluffy wool but you could also use a few scraps of cloth or cotton wool.  I sewed this inside a scrap of cloth, being extra cautious considering there are small beads inside (choking hazard).

Rattle nestled in wool

Sewing the rattle and wool inside a scrap of cloth

Rattle done!  Now for the streamers.  I sewed ribbons, a feather and a shoelace onto a little scrap of cloth to keep them together.  The shoelace is for the human to play with, to make the toy move, wiggle and fly.

Finally, insert the rattle and the cloth end of the streamers into the open end of the sausage.  If there is empty space just stuff with more cloth, wool or paper.  Sew it up, and shake it at your kitty!

Streamers and shoelace attached.

I can't over-emphasise the importance of feathers.

Any other ideas for improving this toy?  I'd love to hear them.


Project idea from
http://www.greenlittlecat.com/day-15-weekend-homemade-cat-toy-ideathe-30-day-green-cat-challenge/

Cat Scratching Tray

     I've seen a few of these cardboard scratching trays for cats.  Most of the commercial ones are rectangular but I chose to make the circular design.  Why buy one when you likely have access to all the materials you need to make one?  In fact, many of us pay to dispose of cardboard, so make some savings while satisfying your urge to create.

Materials needed:
         Corrugated cardboard: Boxes, packaging, etc.
         Stanley / craft knife / scalpel or scissors
         Tape
         Ruler or, in my case, a plank of wood. Anything you can use to cut a straight line.

     Using a plank of wood as a ruler I used a Stanley knife to cut strips of cardboard, making sure they were of similar widths by cutting them the width of the plank.  If using a ruler you can measure the widths, but that's a lot of effort for something which doesn't require such technical control.  Cut across the corrugation, not along it, so you see the zig-zag of cardboard filler within the cut.

      Roll a strip of cardboard up tight: see photo above.  Pull the strips through your thumb and forefinger to soften them and make them easier to roll up tight.  Secure the end of each strip with tape, attach the next strip and continue.  Eventually you will have made something that looks like this.

      I was so absorbed in the project that I forgot to photograph the last step: making a base for the tray.  A base is necessary if you intend to scatter some catnip into the tray.

Pizza box recycling logo seemed appropriate

      Place your scratching tray on a piece of cardboard which is of larger diameter than the base of the tray.  A few inches is plenty.  Draw around the tray, then draw a larger circle around that, making a border a few inches wide.  Cut a series of slits into the border, to create tabs. 

     Replace your tray into the circle and bend the tabs to touch the sides of the tray.  Wind some tape around the tabs to secure the base.  Cover with another strip of cardboard to hide the construction.  For illustration I've reproduced and photographed the technique below.  Picture the orange Post-it as the piece of cardboard.  C'mon guys, use your imagination here!

 

      Add catnip and cherish your unscratched furniture! 

DIY Cat Box Toy!

Take a cardboard box, cut some holes in it, place ball inside, preferably bigger than the holes, and enjoy!  Use a ball of tinfoil if you haven't any others.

Cat Tree

     A new addition to the household has proved himself to be an avid climber.  Within hours of arriving this kitten had conquered most of the tall surfaces in the flat.  When he wasn't climbing he lay gazing up at the curtain rail and ceiling, probably wondering why us stupid humans have not created a series of shelves or such to utilise the ample space up there.  While the idea of creating a circuit of walkways and ladders for my kitten is appealing, drilling numerous holes in the walls just isn't practical in rented accommodation.  Me being me, I fancied something that didn't cost a penny.  Here's what I came up with.

 
     No trees were harmed in the making of this cat tree.  No live ones anyway.  This tree was felled a long time before I went looking for it.  It's bark had fallen away, and the wood is dry, making it a relatively clean piece.  The trunk of the tree fit well into the hole in the cable reel, I only had to whittle away an inch or so to make it fit.

     Due to the lack of bark and it's dry condition, the tree is smooth and hard, making it difficult for a kitten to sink his claws into.  I braided some wool and wrapped it tightly around the trunk. Twine or rope would be just as suitable and involve less work.  I made no effort to weave in the ends as I could see he enjoyed playing with them.  Top tip: keep the cat out of the room when you do this step: the attraction of wool is just too much for a kitten to resist.  This took much longer than it would have if I hadn't had to compete with paws and claws!

     Last, but certainly not least, hang some toys on the tree.  Baubles, pom-poms, bows, bells, tinsel, whatever you can find.  Look for shiny, soft or noisy things especially.  Everything is a toy when it's dangling near a kitten: they find most things interesting because the world is still so new to them.  Be aware that long strings may prove dangerous to a climbing kitten:  Best to keep them short or use light yarns which can break easily in the event the kitten gets tangled in them. 

 

     I'm so happy with this project.  Scholesey is even happier!  The tree gives him access to the curtain rail, from which he presides over his territory and his pet humans.  After a long nap he awakes hyperactive, charging about and scaling the tree in seconds.  He challenges himself to find ever-more difficult ways of making it to the top and becomes monkey-like, swinging from branch to branch.  He enjoys nestling in the crook of a branch and batting at the toys up there, and we get great pleasure out of watching his antics.  Have you the honor of sharing your home with a tree-cat?  You know what to do.